Good guilt - a beautiful frame. A beautiful bottle and label can be supplemented with a beautiful stand for wine and glasses. Making such a stand does not require a lot of money and time. The stand can accommodate a bottle of wine and three glasses.
Tools and materials:
-Pine board;
-Copper tube;
-White spray paint;
-Epoxy adhesive;
-Glue for paper;
- Electric jigsaw;
-Drill;
- Jigsaw;
-Hacksaw;
-Drill;
-Rasp;
- Clamps;
-Sandpaper;
-Salt;
-Vinegar;
-Water;
-Plastic container;
Step One: Template
The first step is the master makes a stand template. Draws a sketch of all the elements. Then cuts out a pattern of wooden pieces. Sticks patterns to the board.
Step Two: Making Wooden Parts
Jigsaw cuts the details. Drills holes according to the pattern. Edges with a rasp.
Jigsaw makes cuts in a board for glasses.
Step Three: Copper Tubes
For the stand you need to cut four tubes, two of 21 cm and two of 11 cm.
Drills holes for pipes in wooden parts. Holes need to be drilled to 1/2 thickness of the board.
Step Four: Grinding
Removes paper from wooden parts. Sand the surface with sandpaper from 120 to 220.
Step Five: Painting
Paints the wooden parts of the stand.
Step Six: Cleaning Copper Tubes
Copper tubes are placed in a plastic container. He poured salt into the container and added vinegar. Vinegar should cover the tubes. Five minutes later he pulls out a tube and wipes it with a rag.
Seventh step: assembly
Starts assembling the stand. The tubes are fixed in the holes with epoxy glue.
The stand is ready, it remains to place a bottle of wine and glasses on it.
The whole process of making the stand can be seen in the video.