In this article we will consider the manufacture of a simple LED lamp. The manufacture of such a lamp does not require large expenditures, all tools can be replaced with simpler manual ones.
Tools and materials:
-Wire with LEDs;
-Glass vase;
-Plastic bottles;
- PVC pipe;
-Cement;
-Sealer;
-Insulating tape;
- food wrap;
-Knife;
-Marker;
-Roulette;
-Face saw;
-Master OK;
-Glue gun;
-Grinder;
-Drill;
-Drill;
Step One: PVC Pipe
Smoothes the end of the pipe, then cuts two pieces of 12 centimeters (into two lamps).
Step Two: Bottles
The interior of the base must be hollow, so the master cuts two bottles and places them inside the pipe.
Step Three: Sealant
A seal is glued into the inside of the upper part of the pipe. The lower part is wrapped with a film and secured with tape.
Fourth step: making the base
Prevents the bottle in the center of the pipe. Makes a cement mortar and pours it into molds. To evenly distribute the solution, tap the walls of the pipe, and then use a vibrating tool.
After concrete has solidified, the master removes the seal and pipe.
Step Five: Grinding
Removes a plastic bottle. Drills a hole in the center of the base. Cut the channel under the wire. Grinds the surface, adjusts to the diameter of the vase.
Step six: electrical part
Glues the controller into the base by connecting and pulling the LEDs into the hole.
Step Seven: Final
Coils the LED wire onto the tube. Removes rings of wire from the tube and places in a vase. Sets the vase on the base.
Now it remains to connect the wire and turn on the lamp in the network.
The entire process of manufacturing the lamp can be seen in the video.