In this article, we will look at how the Master made the bed. As a material, boards of 20 mm were used. So, the master bought the necessary material at the nearest sawmill - a few boards from pine. Before building, I dried these boards for four days, after which I set about creating a new bed.
So what do we need;
- boards;
- tool;
- PVA glue;
Step One: Gluing
The first step, the master milling cutter made an even groove and simply glued the usual PVA glue boards 20 mm thick. Clamped with homemade wood clamps.
Later, the master drew the shape with a pencil, sawed it out with a jigsaw and worked the edge.
In the photo, the back (bottom) and the headboard (top).
Step Two: Making Legs
On a lathe, 4 legs were machined from a bar of wood and grooves were made with a milling cutter.
Step Three: Painting and Assembly
I used a spray gun for painting. Then the master assembled and installed the bed
