Rabbits appeared, there was a question about feeding troughs, the bowls were turned over, more spoiled than consumed. Well, so I made grain feeders for my pets and decided to share with you.
Will need:
A piece of plastic pipe
Hand Saw
Self-tapping screws about 15-20 pieces
Small pieces of usb boards
Plastic bottle
Stationery knife
Screwdriver
Crayon
A bit of wire
So, we take a plastic pipe to measure the part we need from it and saw it off and then saw it along to get 2 separate parts.
Then we take a piece of the board and saw it into 2 equal parts with a saw. One of my pieces was round.
Then we apply the cut workpiece from the plastic pipe to the workpiece and mark the place of fixation with chalk.
Next, with the help of Samoyeds and a screwdriver, we fix the plastic to the wooden sides.
That's what we get.
We pass to the second part of the feeder.
We take a plastic bottle and cut the bottom with a stationery knife.
Then we make two holes in the bottle, take a small piece of wire and extend it into holes.
And you also need to make two holes in the finished feeding trough, I made them with a screwdriver and self-tapping screws and we also thread the wire.
And it remains to establish this whole thing in the cage.
Pour the grain and check. Rabbits are happy !!!
All!!!!
Have a nice day and enjoy homemade!!!