I welcome everyone, I propose to consider a simple and convenient oven for a cauldron, which you can make do it yourself. They are often made from gas cylinders, but the author decided to make from the body of the fire extinguisher. The furnace is made very simple, it is designed for outdoor use. In general, its size is small and you can take it with you to nature if you are traveling by car. A cauldron is installed on top of the stove, cooking can be done quickly and conveniently, the stove needs little firewood, since almost all the heat rises to the dishes. Part of the heat goes to heating the furnace itself, thanks to this you can warm yourself near such a stove. Of course, you can simply light a fire, but do not forget that it is problematic to do it in windy, wet weather or in winter.
If the project interests you, I propose to consider in more detail how the oven is made!
Materials and tools used by the author:
Material List:
- housing from a fire extinguisher;
- two door hinges;
- materials for the manufacture of pens.
Tool List:
- welding machine;
- grinder;
- drill.
Furnace manufacturing process:
Step one. Cutting a fire extinguisher
First of all, the author unscrews the wheels from the fire extinguisher and cuts off the handles, as well as removes the axles of the wheels. After that, you can cut off the neck of the container, as a result, inside the fire extinguisher you can find the powder, pour it.
Step Two The foundation
As a basis, the author used the neck cut off earlier. We weld it to the base.
Step Three Door
We cut out the door in the case and then hang it on the door hinges. In order not to bother, the author simply welds the loops.
Step Four Final assembly steps
At the end, we install a handle on the door, the author has a metal handle and this is bad. And why it is bad, the author finds out when he will melt the stove and try to open the door.
We also left cut handles, weld them back so that the oven was convenient to carry. And if you show a little imagination, you can install wheels on the stove.
We also need to drill holes in the furnace.At the bottom, they are needed for air supply, and at the top so that smoke can escape from the furnace and the combustion process is supported. That's all, the project is over, I hope homemade you liked it. Good luck and creative inspiration!
