Good day to all. In this article, the author of the channel “Mr SunY” will show how and from which such homemade. Such a tool is useful to everyone. In addition, collecting such a tool do it yourself, you can not bad, save. After all, the average price of a factory tool is $ 30. And at present, for many, this is a decent amount.
And so the list of materials that the author used.
Profile pipe 25 mm by 25 mm.
Hairpin M 10.
Nut to her.
Bearing.
Hairpin M 8.
A couple of simple nuts to her.
And one lamb.
Profile pipe 15 mm by 15 mm.
The extended nut.
Blade of a construction knife.
Washers.
First of all, from a larger profile pipe, the author measured a piece of the desired length.
And cut it off.
After a large pin welded to this piece.
And cut off the excess.
I installed a bearing on the stud.
And fixed it with a nut.
Then he made a hole in this place.
Next, I installed a nut in the hole.
And holding a bolt, welded it to the workpiece from the profile.
Then I installed a piece of a stud with a wing nut pre-welded to it.
One detail of the future instrument is ready.
Then I installed a 15 mm by 15 mm profile pipe in this part.
Then I installed an elongated nut in a smaller pipe.
And welded it to the pipe.
I cleaned the seams.
Then he installed a piece of M 8 stud in the nut.
Then the puck.
A knife blade and another washer.
And well fixed it all with a nut.
That's all the tool is ready.
Test. Drywall cutting.
Change the blade to a pencil.
Marking and transferring accurate dimensions.
Using the tool as a compass.
Such a tool can work not only with drywall, but also with other materials such as rubber, leather or plastic.
And that’s all for me. Thank you all and see you soon!