In this article, YouTube author "George Kosilov" will tell you how he made a Christmas tree from plywood.
Materials
- plywood sheet
- Water based radiator paint
- LED garland.
Instruments, used by the author.
- A circular saw
- Electric jigsaw
- Joiner's knife, pencil
- Spray paint, or spray paint
- brush
- Sandpaper.
Manufacturing process.
So, the author tried to draw a template by hand, but with artistic skills he didn’t really ...
Therefore, he simply downloaded the picture from the Internet, and printed it at an advertising agency.
There you could cut a template on a plotter, but the author did not think about it and cut the template manually.
Then he outlined the contours of the template on a plywood sheet.
The result is such a contour.
I removed the large elements of the sheet with a circular saw.
I cut out small parts with an electric jigsaw.
The layout of the Christmas tree is ready, it remains to wipe the place of cuts with sandpaper.
And then paint with water-based paint for radiators, it dries quickly and is environmentally friendly enough.
To paint with a brush for a long time, the author used a spray gun, and painted the layout on both sides.
Then he wrapped the tree in a garland, and you're done!
The socket successfully hid behind the Christmas tree, and the backlight very well highlights the contour of the Christmas tree.
Here is such a New Year beauty turned out by the author.
Thanks to the master for a great New Year's idea!
I congratulate everyone on the upcoming New Year, good luck and health to you!