Maybe the summer will still be !?
Took as a basis model Vladimir Sereda SCROLL SIGMA-PROXI
I remembered the Joasaph model and decided to make a more advanced model of the SVP.
Materials and electronics.
Basically, to build the model I use a simple substrate for a laminate, blue, 5 mm thick. . A piece of Penoplex insulation is placed under the motor and halted. . Glue universal, moisture resistant "CIN". For the "skirt" of the air cushion fence used an old Bologna raincoat.
Air injection motor - D2826 / 10 1400Kv
Screw - 7 x 6.
Battery - 2200 3S
The regulator is 40A.
Marching motor - Turnigy D3548 / 4 1100KV
Power - 910W
Thrust - 2150g.
Screw - 11 x 7
The regulator is 60A.
Battery - 2200 3S
First of all, the shape of the “skirt” of the air cushion fence was changed.
She became triangular in shape.
In accordance with this, I had to redo the patterns.
Made a block for the "skirt" of the fence.
I stuck the "skirt" in its place
and immediately installed the airbag unit on the SVP platform.
I glued the sides of the fuselage and the inner ring of the air intake.
Reinforced the wing with a wooden rail, section 50 x 5 mm
Glued the inner edge of the fuselage.
Installed stiffening ribs in the wing.
He began to put the upper skin of the wing and fuselage.
Together with the skin of the wing and the fuselage installed tail.
Put the windshields on the cab.
I glued a piece of hardboard on the keel to install the motor. Installed a servo for the pH.
Pilots tested their places.
Last moments on the slipway.
With a blow.
This is how the model on earth looks.
it is with a working airbag.
And this is without an air cushion.
The "chief engineer" himself tested the device.
And this is a selfie with the new model.
A small video, a test of motors and rudders.