Finally, the time has come to give birth to an aircraft model dedicated to my niece Barbara.
It’s my tradition to give names to my models.
Finally I picked up an option for the upcoming model construction.
Long chose.
This should turn out to be LC.
I draw on paper, measure, set dimensions, transfer to the ceiling and cut.
After trying on, I paste the details into place.
The wing consists of three parts. Two consoles and a middle insert.
Preparing to mount servos.
The wing is glued, the servos are installed, I begin to tighten with colored tape.
Model from different angles.
Made the fuselage, now there is where to hide the battery and the whole electronics.
Now you can freely move the battery to get into the DH.
It turned out very beautifully.
Hanged the elevons.
Cut blanks for winglets, tried on.
I paste winglets, put servos and boars, you can connect traction
Varyukha already imagines how a model with her name will fly.
Dimensions of the model.
Length - 700 mm.
Span - 1000 mm.
The weight of an empty “carcass” is 300 g.
Motor - AX 2308N 1100kv.
Screw - 8 x 3.5.
Regulator 40 A.
Servos - NHT-900
Battery - 3S 1300
This model turns out like this!
The "General Designer" with the "Chief Engineer" took the job.
Corrected the mistakes made.
The wing profile is ordinary - the bottom is straight, the top is convex.
The wing does not have a V angle.
He conducted several experiments with winglets, ultimately removed them.
An exciting moment came to test the model.
Here is all the electronics.
Received a gesture of approval from Varvarka for the model, which he named her.
Inspection before the first flight.
Who the next model will be dedicated to has not yet decided.