Probably everyone came across a glue gun during repair work. How difficult it is to press the lever and squeeze out silicone, or liquid nails, you know for yourself. So, in this article, the author of the YouTube channel "DIY PEREC" will tell you how to mechanize this simple tool.
Even with a small arsenal of tools, this improvement can be done in a few minutes.
Materials
- glue gun
- Silicone.
Instruments, used by the author.
- Grinder, cutting disc
- Vise
- Welding machine.
Manufacturing process.
The author had a regular pistol for standard silicone cylinders, but he was tired of pushing the handle.
Therefore, he clamped it in a vice, and sawed off the stem of the stem.
Then he pulled out the stem and clamp.
Cut off the clamp grinder.
The result is such a detail.
Then he cut the trigger.
Also cut off part of the handle, it is no longer needed.
At the rear of the structure, I cut the thread with a tap.
Screwed the stud, and welded a clamp to it.
I cut off the excess part of the stud, clamped it in the cartridge, and the tool is ready to work!
So, with a simple rotation of the stud, the clip moves.
Now you can install the cassette with silicone, and do the work.
Here is device It turned out from the master.
Thanks to the author for a simple but useful device for routine work!
All good mood, good luck, and interesting ideas!