In this article, we will look at how to make a wall lamp in the style of "infinity mirrors".
Tools and materials:
-Boards;
-Aluminum strip;
- LED strip 12 V, 14.4 W;
-Network adapter for LED strip;
-Tinted glass;
-Mirror;
- Joiner's glue;
-Electric cord;
-Finish for wood;
-Silicone glue;
- Sandpaper 80, 120, 240 grit;
- Band saw machine;
-Circular Saw;
-A circular saw;
- Planing machine;
-Soldering equipment;
- Glass cutter;
-20 mm drill;
-Drill;
-Grinder;
-Roulette;
Step one: procurement of parts
Each lamp housing consists of six side, one back and a decorative lining. From the board cuts the workpiece blanks.
Rounds off blanks.
Step Two: Aluminum Strip
In each side strip, two longitudinal grooves need to be cut. One groove for glass, with an edge, the second for an aluminum strip, in the middle.
For a mirror, removes wood from the edge of the planks.
Glues the strip into the groove.
Cuts the edges of the slats at an angle of 30 °. The length of the side walls is 14.5 cm.
Step Three: Mirrors, Glass
According to the template cuts three tinted glass and three mirrors.
Step Four: Build
Glues the body, after inserting the glass.
Grinds the case.
Drills a hole for the wire.
Glues an LED strip onto an aluminum plate.
Checks the operation of the LED strip. Glues a mirror.
Step Five: Pad
From a wooden block makes a patch that disguises the junction of the wires.
Mounts wires and glues pads.
Step Six: Finish
Apply varnish to the body.
Now it remains only to fasten the mounting bracket and hang the lamps on the wall.
