Hi, lovers of delicious food to eat in the fresh air, I propose to consider a grill machine for the especially lazy. Homemade she cooks almost automatically, she turns the kebab or other food over the coals and at the same time she inflates the coals so that they give heat. All that is required of the "cook" is to monitor the coals and toss them up if necessary.
Speaking seriously, the machine is very convenient to use, runs on a battery, greatly simplifies outdoor recreation and allows you to cook even tastier. Everything works on a small gear motor, and the air is pumped by the fans from the computer. The machine is controlled by two switches, one controlled by fans, and the other by a chain drive. If the project interests you, I propose to study it in more detail!
Materials and tools used by the author:
Material List:
- sheet metal;
- profile pipes;
- (can be adapted from janitors);
- sprockets and chain;
- bolts and nuts;
- stainless steel rods or skewers;
- two fans from the computer;
- boards;
- two switches;
- wires;
- batteries.
Tool List:
- welding machine;
- grinder;
- drill;
- soldering iron;
- tape measure, marker;
- paint;
- a hacksaw.
Homemade manufacturing process:
Step one. Make skewers
The first thing we’ll do is skewer, here we need stainless steel rods or ready-made skewers. The most important refinement of skewers is to install small stars on them, thanks to which the skewers will spin while lying on a chain.
The author clamps the sprockets on the bolts with nuts, and through the bolts drills holes for the rods. Well, then these bolts are simply welded to the skewers.
In addition to ordinary skewers, the author also has tridents designed for fish, vegetables and other similar products. Tridents can be welded from ordinary skewers. Sprockets and bolts are painted with heat-resistant paint.
Step Two Assembling a stove
To assemble the furnace, sheet metal is needed, the steel should be thicker, then it will last longer and will not burn out so quickly.We cut metal and weld. In one of the walls you need to cut slotted holes, through them we will blow fans on the coals. We drill holes with a drill, and then cut through the slotted holes with a grinder.
We assemble the frame and legs for the table, here we need profile pipes. We also install a gear motor on the frame. We fasten it with steel plates.
Step Three Chain installation
We take the chain and cut it to the desired length, to tension the chain we need to install two sprockets on the furnace. It will be a kind of tensioners and guides. We use bolts as axles, here the sprockets should rotate easily.
That's all, now just put the skewers on the chain with asterisks and the system is ready to start. We supply power to the engine and see how everything works.
Step Four Painting
We paint the furnace and all other steel parts so that they do not rust. We always take heat-resistant paint, and before using the furnace, we must heat it at idle to burn out all harmful substances.
Step Five Final assembly and testing
We install two fans on a homemade product, for their fastening, the author screwed the boards to the frame, and the fans are attached to the boards through the corners with screws. We also install batteries and two switches.
The homemade product is ready, we string meat, fish, vegetables and other products on skewers, we kindle the coals. Now the coals can be easily inflated by pressing a button. Well, then it remains only to ensure that this whole thing does not burn out.
That's all, the homemade product is ready, bon appetit and outdoor recreation! Good luck and creative inspiration, if you decide to repeat this. Do not forget to share with us your ideas and homemade products.