» Modeling » Aviation »Radio-controlled model aircraft promising fighter AL-609" Dominator "

Radio-controlled model aircraft promising fighter AL-609 "Dominator"

Radio-controlled model aircraft promising fighter AL-609

Good afternoon, lovers of aircraft modeling.
This is not the first time that I have touched on the topic of aircraft modeling, where model "Dominator."

Many aircraft models, from different countries, tried to create a similar model.

This is the version of the Dominator model by Umberto from Brazil. and aircraft modeller Oleg from Kulebaki. Even in America, they created a similar aircraft model.


I myself made attempts to keep up with the author of this project. Many built, but no one created a copy of this model. And the point is not the absence of drawings, the whole point is a thorough, deep approach to the construction of this model by the author. Before starting to create this model, the author made many sketches and sketches, the nascent appearance of this model.





Yes, unfortunately, the author does not give a detailed description of the entire creative process, the creation of the model, and only by a few photographs can we judge the complexity of building this model.

Dimensions of the model.
Length - 1800mm.
Span - 1260 mm.
Weight - 3120g.
Impellers - 2X Turnigy 3025 1500KV 1300W (EDF 90)
Battery - LiPo 6000 6S 25-50С

These are sketches and sketches that preceded the appearance of the model.


First of all, the author made a supporting platform on which all the details of the model are mounted. Starts with trying on an impeller.

Rigidity ribs are glued in, which, after covering the ceiling, create a wing profile.

The ceiling is a rather fragile material and you have to tighten it with transparent tape before trying to bend the model details out of it.

It was the turn of trying on impellers.


The author made removable end parts of the wing. In addition to this collapsible, the nose of the fuselage was also made.



Almost all the details are tried on and chased at the place of installation.








Covering the model with colored tape.

Checking the rudders.

Installation of OVT.

Keels are made all-turning.


The author paid much attention to the manufacture of blanks from wood, for the manufacture of a lamp for the cockpit.



An important detail for the good work of impellers is the manufacture of ducts.


Design work on the model ends.

And this is a finished model, in all its beauty.




















This is how the model looks in the air.



It has been many years since I saw this model “alive” during the author’s arrival with my models, and I can’t forget the fabulous flight of this model.



The beauty of the flight of the Dominator is evidenced by the fact that at the Nefyodov Cup the model received the cup for the most spectacular flight.



A bit of video.




That's probably all that I can tell you about the Dominator model.
Bye. Your valerian.
9
6
8

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose

We advise you to read:

Hand it for the smartphone ...