Hello friends, I present to your attention good device for marking up various parts. The fixture helps a lot if you need several parts of the same size or the same width. This homemade helped me with the layout of a sheet of flat slate on strips with a width of 150 mm. Homemade handy builders, home craftsman, welder, locksmith, and more! You can make the device practically from waste material, which is lying under your feet. You will need skills to work with tools, a minimum of tools and of course a desire, where without it!
Almost everyone can do it, it will not take much time and materials, but there will be many benefits. Do not regret it! This homemade make life easier for everyone. It took me a little time to do this homemade work, and there are many benefits from it, which significantly reduces the time for marking parts. If you liked the homemade product, I propose to see the manufacturing process in more detail in the video:
Tools and materials:
- Bulgarian
- Drill or drilling machine
- Steel sheet 3.5 mm thick
- Plastic ruler
- A bolt with a lamb
- Taps for threading
- pencil
Let's start, take a sheet of steel 3.5 mm thick and draw a 3.5 cm * 3 cm rectangle on it
Cut it with a grinder
We file to remove burrs.
Cut two pieces from a sheet of the same thickness
Weld
To get something like this
Grind grinder
Next, drill a hole with a drill and cut the m6 thread
From a thin channel we cut out using a grinder a corner
And we weld it to the first workpiece so that the edge of the corner is in contact with the edge of the workpiece
Next, we weld the resulting hole with the same steel
We select a bolt with a lamb, insert a plastic ruler bought in a store and our homemade product is ready
Using it is very easy, the corner works like a guide, and we just lean the pencil and lead!
Thanks for attention !