The site presents several original cases for a USB drive, in the style of steampunkin a chewing gum case, etc. In this article, we will discuss how to install a USB drive into the body of a micro audio cassette. Such tapes were used, and maybe even now, are used in voice recorders. You can buy cassettes with a drive (samples can be seen in the latest photos), but the master decided to make such a device on his own.
Tools and materials:
-3D printer;
-Knife;
-Rule;
-Scalpel;
-File;
-Sandpaper;
-Nippers;
-Cassette;
-USB drive;
Step one: disassemble the cassette
First you need to disassemble the cassette. If there are mounting screws, unscrew them, using a knife, disassemble the cassette into two halves. The magnetic tape needs to be removed.
Step Two: Measure
Takes measurements inside the cassette and the USB drive. Makes calculations and draws a drawing of the necessary details.
Step Three: Printing
Prints details on a 3D printer. Installs bushings into the body of the USB drive.
Step Four: Modernizing the Cassette
Installs the drive in a regular place. The drive must exit the housing when turning the sleeve. Removes all partitions that interfere with drive rotation.
Step Five: Podkassetnik
In order for the cover of the cassette to close, you need to remove the pins from the inside.
Step Six: The Label
Prints labels. Sticks them on a cassette.
All is ready. Subsequently, the master used the device in a car radio.