To make motorcycle with a cart of knots, branches and logs, you will need patience and rich imagination, but the result will certainly exceed all your expectations. Harvest in advance several logs of various diameters, one large log, branches of various sizes and lengths. Now the hardest part is getting started. First you need to make a bench for the cart. To do this, cut the log in half, as shown in the photo - this will be the bench. Then saw off a few round logs from the logs and process them. I must say that all elements of a wooden structure, before being installed, are carefully processed with sandpaper to exclude the possibility of injuries and splintering. Join the round timber together with a pre-processed branch and place it under the bench. To the axis of the cart (this is what we will call the design of two round logs and a longitudinal branch) with the help of nails or screws, attach two more branches that will act as a frame. Place a chair on it - a piece of log with a round nailed on top of it.
For the front and auxiliary wheels, which is located in the middle, also saw off the round timber. But in order to make a frame for the drive wheel you have to try - you need to find a thick U-shaped branch and place a round timber in it. All other connections, small details and even tuning can be performed from processed knots and branches to your taste. After all model assembled it is necessary to process all the details several times with varnish, for greater safety of your crafts. And even if you don’t get far on such a motorcycle, it will certainly bring a lot of joy and good mood to everyone who sees it.
If you are afraid to embark on such a difficult project, in your opinion, then for now you will have to move around the cottage in a pretty donkey. One large log will be an excellent body for crafts.Four sticks - legs, one - a neck on which a donkey's head is fixed. You don’t even need to use nails during construction - just drill holes of similar diameter into which stick legs and neck will be inserted. A donkey's head is cut out of a log with an ax and a sharp knife, and ears are attached to it. Such a craft can be assigned to any wagon in which, for example, flower pots will be located.
Yes, a summer cottage is a completely different world in which you can enjoy intimacy with nature, clean air and make various crafts that will not only decorate the garden, but will also perform useful functions, for example, will serve as an original stand for flowerpots or pots.