And from the barrel you can make a coffee table, as it turned out with the master. And how he did this, we will consider in this article.
Tools and materials:
-Metal barrel;
-USHM;
-Roulette;
-Cardboard;
-Marker;
-Knife;
-OSB;
-Drill;
-Board;
-Bar;
-Hacksaw;
-Gon;
- Pliers;
-Kember;
-Auto sealant;
-Fasteners;
- Bushings;
- Stain;
-Personal protective equipment;
Step One: Cutting, Grinding
Cuts the barrel around the circumference. Need a part without a bottom. Grinds puncture barrels.
Step Two: Template
Measures barrel diameter. Cuts out a pattern from cardboard.
Step Three: Countertop
The master had trimmed the OSB, and the whole countertop could not be cut. Then he cut out two semicircles. And connected them with the help of cross bars.
Step Four: Build
Sets the countertop inside the barrel. The bars are screwed to the inside of the barrel. Screws the countertop to the bars.
Step Five: Feet
Cuts legs. By the edge of the barrel sets a car seal. Screws the legs.
Step Six: Shelf
Cuts two more semicircles from OSB. Tightens them, folding one on top of another, to the countertop, through metal spacers.
Now it remains to cover the OSB with a stain and you're done.