» Furniture » Tables and chairs »Cool DIY stool

DIY do-it-yourself stool


Good day to all. In today's article, the author of the cemaL AÇAR channel will show how he made a cool stool do it yourself, from old unnecessary trash.

For this homemade the author used.

MATERIALS:
Laminate Scraps
Polyurethane foam
Table leg
Old jeans and sneakers
Board
Foam rubber
Wood screws.

INSTRUMENTS:
End Saw
Electric jigsaw
Pneumatic stapler
Staples
Electric drill
Drill
Marker
Screwdriver
Scissors
Wood glue
Clerical knife.

First, the author glued pieces of laminate foam.

After I drew a circle on this blank.


And cut out the top of the future stool.


After that, the author cut off two identical pieces from the table leg.

Now it will be the legs of the stool.

Having decided on the meta of fixing the legs.

The author made four holes in the marked places for attaching each leg.

After applying glue, then setting each leg in its place, fixed it with screws.


Then he made such blanks from the board, in the form of shoe insoles.


After, I made a hole in these blanks for attaching the legs of the stool.

And he also applied glue and fixed it with screws, these blanks to the legs.



This type of stool has at this stage.

Further, the author will cut a circle out of foam rubber. The size is not much larger than the upper part of the chair.


And four strips (two on the front side of the legs, and two on the back).

Attach strips of foam on the legs with a stapler.


Then taking old jeans, he will cut them. As shown in the photo below.



And having laid and aligned the material on the top of the stool, on top of the foam.

Fix it with brackets to the bottom.




After cut off excess material.

Like this.

After cut off two legs, the size of the legs of a stool. Then put them on their legs.


And corrected.

Fastens the upper part of the legs to the stool with brackets.

After cut off part of the belt from the pants.

And attach it to the stool with a stapler, as shown in the photo.



At the end of the homemade work, the author will put old sneakers on the legs.

Such an interesting homemade work turned out today by the author.


Thanks a lot to the author, the homemade work turned out great. And most importantly, for its manufacture, the master did not need anything special.And everyone can make this homemade product.

And that’s all for me. Thank you all for your attention and see you soon!
7.3
7.8
7.8

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
2 commentary
- like two fingers,


You wanted to say, "How to send two bytes?" )))) ....
Or ... Still, "Like two fingers on the asphalt!"? ))))
The author made four holes in the marked places for attaching each leg
It seems to me, flimsy mount! I apologize for the bad manners, but it seems to me that onereturn from this stool - like two fingersYou won’t collect bones! smile

We advise you to read:

Hand it for the smartphone ...