» Materials » Throw material »Table lamp from a camshaft and spare parts do it yourself

DIY floor lamp from a camshaft and spare parts

Hello dear readers and the inhabitants of our site!
Many residents of our site make lamps from various unnecessary materials.
In this article, the author of the YouTube channel "Glavnyiy Mehanik" will tell you how he made a beautiful desktop floor lamp from old auto parts. It will surely appeal to auto mechanics, or it will beautifully complement the interior of an office at a car dealership.

Materials
- Old camshaft from VAZ

- Air filter cover from VAZ 2101

- The front crankshaft pulley from the VAZ 2101

- Air filter A005

- Cartridges, LED lamps, cord switch
- Network plug, fabric braided cable
- Second glue
- M6 bolts
- Plumbing clamps
- Black and silver spray paint.

Instruments, used by the author.
- Sandblasting machine
-
-
- Wrench
- Screwdrivers, wire cutters, pliers, vise.

Manufacturing process.
Such a camshaft is very convenient for making a floor lamp stand. It has an internal oil channel, and a wire will pass through it covertly.

For the reason that all the parts are old and dirty, the master processes them with a sandblasting machine. You can also clean surfaces with a grinder with a brush disc.



An oil plug is installed on the second side of the camshaft. The author makes a cut for the wire. This will be the top of the rack.



The back of the pulley also makes a cutout for the wire.




Then welds the camshaft to the pulley


To fix the lid, it grips by welding at four points. The loads are small, and a thin cover can be burned.


The bottom of the lid and the stand is painted silver, and the stand and the top of the lid are painted black.



So, the basic design is ready.


The author came up with an original mount for cartridges. These are ordinary plumbing clamps. He screws them through the standard openings to the lid, and fixes the cartridges in them.



Then passes the wire through the rack.


Now he installed the switch, and connected the power circuit. The master switch used a cord type.
The fabric braided power cable is also a design-friendly one.



It remains to complete the manufacture of the lampshade. To do this, the author glued the air filter from the Volga with second glue.


The filter is slightly larger in diameter than the cover, and it looks very good.





Here is a lamp turned out by the author. Due to the silver coating of the upper part of the lampshade, a kind of reflector is obtained, and the lamp evenly illuminates the working surface of the table. It can also be used as a night lamp.



Thanks to the author for a simple but interesting design decision!
All good mood, good luck, and interesting ideas!

Author video can be found here.
10
10
10

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose

We advise you to read:

Hand it for the smartphone ...