The master always wanted to have beer taps at home. They can be used during parties, because from these taps you can pour anything you want: beer, cider, wine, water and even whiskey. Children of the master love to pour sparkling water out of them.
The installation of such cranes will not cause special difficulties and for this you will need the following
Tools and materials:
-Keg;
-Tubes are plastic;
-Fitting;
- beer taps;
-Cylinder with CO2;
-Reducer;
Valves for kegs;
-Board;
-Pencil;
-Rule;
-Level;
-Clamp;
-Drill;
- Feather drill;
- Linseed oil;
-Brush;
-Drill;
-Hammer;
-Chisel;
-Fasteners;
-Pipe wrench;
Step one: board preparation
To install the cranes, the master purchased a board. On the board makes markings and drills holes for installing cranes. Covers the board with linseed oil.
Step Two: Prepare the Installation Site
Marks on the wall the place of installation of the board with cranes.
The cranes will be connected from an adjacent room. According to the marking master, there are three holes in the wall.
Drill mounting holes.
Step Three: Installation
Before installing the cranes in the wall, the master first collects the trunk.
Installs taps in the hole in the board and fixes.
Installs and fixes pipes (pipes must withstand pressure in the line).
He pulls the tube into the hole in the wall and fastens the board with the cranes.
Fixes the tube to the wall.
Step Four: Connect a Keg
For installation, the wizard recommends using Pepsi KEG, also called Cornelius KEG. It can be cleaned and reused. It has a large cover and two valves - gas (CO2) is supplied to one, which will pump pressure, and liquid will be supplied to the tap from the second hole.
The master uses CO2 as gas. Cylinders with this gas weigh from 1 kg to 8 kg. It is impossible to directly connect the gas cylinder to the tank, it is necessary to install a pressure reducer, which will reduce the pressure to 0.5-1 bar.
The scheme is as follows: gas container - gearbox - keg - crane. Before installation, beer, cider, lemonade, whiskey are poured into the keg, all tastes of the master.
Everything is ready, the main thing is not to forget in which tap which drink.
The whole process of installing beer taps can be seen in the video.