What the craftsmen did not do from old perforating drills - both an awl and a chisel, but just a huge variety of products and tools.
In this article, the author of the YouTube channel "George Kosilov" will tell you how to make a hammer out of it.
Materials
- Old drill from the punch
- wide nut
- Marker.
Instruments, used by the author.
- Punch
-, cutting disc
- Vise
- .
Manufacturing process.
So, for this homemade work you will need an old drill and such a nut.
On the storm itself, it should be noted the place to which it enters the cartridge. Then attach a nut, and put a mark on its thickness.
According to this label, an unnecessary part of the drill is cut off, only the shank remains.
A nut with a slight indentation of about 1 mm is put on the place of the cut. Then it is welded.
It turns out here is such a nozzle for a punch.
The rotary hammer is installed in shock mode without rotation.
Of course, hammering nails into the ceiling beams is not an easy task.
With 120 nails, the punch copes just playfully.
But what about 200? Yes Easy!
Thanks to the author for the simple idea of a hammer drill bit!
All good mood, good luck, and interesting ideas!
Author video can be found here.