This table is good for its leg. With a leg of this shape, the table can be placed in a corner, and the leg will not interfere with landing.
Tools and materials:
-Drill;
-Roulette;
- Clamps;
-Miter saw;
-Hacksaw;
-Wood;
-Fasteners;
- Joiner's glue;
- dowels;
Step One: Project
The wizard begins with the project. All dimensions are in inches.
Step Two: Countertop
According to the sizes the master saws a board. Using a conductor, drills holes at an angle. Connects countertop boards with screws.
Then the master fixes the block around the perimeter.
Step Two: Feet
The next step, the master makes the legs.
Cut grooves in the workpieces and connect the legs to the crossbars.
Then the master fastens two upper and two lower crossbars to the cross.
Step Three: Assembling the Table
Now it remains to screw the leg to the countertop and cover the coating with a protective compound.
Now you can put the table in place.