» Construction » Stoves, fireplaces, heating »Simple miniature rocket furnace

Simple miniature rocket furnace


Greetings to all lovers of craftsmen, I propose to consider a simple miniature oven, which can be assembled from available materials. The stove is small and light in weight; you can take it with you when you go hunting, fishing or hiking. The manufactured furnace is a rocket, in it the furnace is isolated from the environment and as a result it is able to heat up to high temperatures. Thanks to this design, the stove works very efficiently, for it you need a lot of firewood and even raw wood will burn. On such an oven it is not difficult to boil a kettle, cook an ear and so on. If the project interests you, I propose to study it in more detail!



Materials and tools used by the author:

Material List:
- rectangular profile pipes;
- glass wool for insulation;
- a suitable size stainless steel pan;
- a piece of pipe made of stainless steel (or iron);
- corner;
- sheet metal for a ring.

Tool List:
- grinder;
- welding machine;
- tape measure, marker.

Furnace manufacturing process:

Step one. Firebox
First of all, we need to assemble the furnace, as a material we need a piece of a rectangular profile pipe. We cut the pipe at an angle of 45 degrees and weld the structure at a right angle. Welds must be airtight so that smoke and fire do not pass anywhere, this area will become very hot.


Step Two Furnace body
Now we will make the furnace body, it will be needed to isolate the combustion chamber so that it can be heated to high temperatures. For the case, the author adapted a stainless steel pan, such a metal can withstand high temperatures and does not rust.
At the base of the pan we cut a square hole and install our pipe welded construction into the body.

Similarly, you will need to cut a hole under the pipe in the pan lid. As an insulator, we put glass wool or other material in a pan that is not afraid of high temperatures. As a result, we weld the furnace to the pan, and also weld the lid.







Step Three Completion and testing
In conclusion, we need a piece of stainless steel pipe or another pan with a trimmed bottom. We weld this part to the furnace body from above, and then it remains to weld the burner so that the dishes can be placed. For the manufacture of burners, you can use sheet metal.

We also weld into the furnace a piece of the corner, which will serve as grate.









The furnace can be tested, it can be heated with chips and sticks. Works homemade excellent, got a wood-burning burner. On this project can be considered successfully completed, I hope you liked the homemade work, and you found useful thoughts for yourself. Good luck and creative inspiration, if you decide to repeat this, do not forget to share your ideas and homemade things with us!


7
7.4
8.1

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
2 commentary
Argon.
Guest dima
what does he cook?

We advise you to read:

Hand it for the smartphone ...