Sooner or later, people who often work with airbrushes have an acute question of cleaning it, and then this set of 11 items can come to the rescue. It includes 5 small brushes of different diameters with a nylon pile (fairly uniform), 5 wire spirals of different diameters and a special needle for cleaning the nozzle. Spirals and brushes are attached to the rings, so you don’t have to worry that they will be lost. The needle is made of stainless steel, its body is made of metal and covered with anti-slip notches, all sorts of defects are absent. In general, the instrument lies comfortably in the hand. It should be noted that some buyers note the presence of burrs at the ends of wire spirals, but this is not a big problem, because they are quite easy to remove. The length of the needle is approximately 80 mm, brushes and spirals - about 130 mm.
The tools are simple, but they perform their function with dignity, and due to the different diameters of their work surfaces, you can clean the equipment as thoroughly as possible. We also note that in addition to cleaning the airbrush, data is useful fixtures and in a host of other areas. For example, brushes from this set will be very useful for clearing deaf holes from shavings after cutting a threaded connection, and wires to clean all sorts of small holes (in plumbing, for example).
Cost: ~ 262