Good afternoon friends! I want to share with you about how do it yourself You can make convenient carrying for everyday work. For this we need the following materials and tools:
1. A network stranded wire 12 m long with a cross section of 1.5 mm2, a euro plug, two sockets, a small segment of 8 mm plywood, 15 * 10 cm in size, self-tapping screws, 16 and 31 mm long, two rails 5 * 40 * 2.5 in size cm, and 2.5 * 8 * 20 cm; two metal plates with a thickness of 1-2 mm and a width of 1 cm, the length of your choice, (I took -15 cm), and 10 cm of aluminum wire with a diameter of 3 mm.
2. Of the tools needed - hacksaws for wood and metal, drill, drill, screwdriver.
We assemble as follows:
Step 1. We assemble the extension cord itself, for this we fix with the help of self-tapping screws two sockets on the cut plywood. We connect a network cable to them, and on the other hand a network plug.
Step 2 We make a device for winding an extension cord.
We cut two metal plates of the indicated sizes with a hacksaw. In a vice we bend them in the shape of the letter “G”, in the lower part of each plate we drill two holes with a diameter of 4 mm, for their fastening to the rail. All this is shown in the photo. We attach plates to a long rail with screws
In the upper part of the rail we fasten the similarity of the ring in the form of the letter "P", this is necessary so that the extension cord can be hung on the wall.
Step 3 On the back of the rail we fasten a small rail, after sawing off its edges, as shown in the photo. She acts as a pen. At the bottom, on the side we fix the plywood with sockets.
We wind the wire on the resulting device.
Carrying ready.
When using the carrier, we unwind the required number of meters of wire and plug it into a 220v network. No need to unwind the entire length of the wire, as the sockets are mounted on a rail. Carrying is convenient in work, does not get confused underfoot, especially when working on the roof of the house. I'm quite happy. And whether you need this - decide for yourself. That seems to be all.
I wish you all creative success in creating your homemade. See you again.