With this cutter, rings of different sizes can be turned out of wood. Useful like device people making furniture, decorations or all kinds of interior elements in large volumes. The main plus of these milling cutters is that the cut rings have a neatly rounded shape and require a minimum of processing (by and large it remains only to grind and coat with varnish or other composition). The cutting part of the cutter is made of an alloy of carbide and tungsten, the drill is made of high-speed tool steel (HSS). Special attention should be paid to the titanium aluminum nitride (TiAlN) coating, due to which the device has acquired increased heat resistance and anti-corrosion properties. On the cutting part of the cutter marked with the designation of the inner diameter of the cut ring. The total length of the cutters does not change and is 80 mm.
The seller has cutters for cutting rings in the following sizes:
• inner diameter: 57 mm / thickness: 5 mm;
• inner diameter: 57 mm / thickness: 6 mm;
• inner diameter: 57 mm / thickness: 7 mm;
• inner diameter: 57 mm / thickness: 8 mm;
• inner diameter: 57 mm / thickness: 10 mm;
• inner diameter: 61 mm / thickness: 5 mm;
• inner diameter: 61 mm / thickness: 6 mm;
• inner diameter: 61 mm / thickness: 7 mm;
• inner diameter: 61 mm / thickness: 8 mm;
• inner diameter: 61 mm / thickness: 15 mm;
• inner diameter: 65 mm / thickness: 8 mm;
• inner diameter: 68 mm / thickness: 8 mm;
• inner diameter: 68 mm / thickness: 15 mm.
We also note that if cutters are required for rings of small sizes, then we can pay attention to this Lot, which presents cutters for rings with an inner diameter of 16 to 22 mm.
The device is not cheap, but it performs its tasks perfectly. Equally well cutters cope with both soft and hard varieties of wood. The cut is clear, soot does not appear on the cut product. It should be said that using these devices you can also cut rings out of plastic.
Cost: ~ 1700