I welcome all fans to craft, I propose to consider instructions for making an interesting grill with a smokehouse in the form of a locomotive do it yourself. Looks homemade chic, but all of ferrous metal was collected. Directly, the stove where the fire is burning is made of a gas cylinder, the grill is made of an old boiler, and the smokehouse can be made of a steel cabinet or a similar drawer. In addition to the chic appearance, the homemade product also works great. If you are interested in the project, I propose to study it in more detail!
Materials and tools used by the author:
Material List:
- steel cabinets;
- gas bottle;
- An old boiler or similar tank;
- fittings;
- door hinges;
- Sheet steel;
- pipes;
- old steel wheels;
- grill;
- furnace thermometer;
- heat resistant paint.
Tool List:
- welding machine;
- grinder;
- roulette;
- marker.
Homemade manufacturing process:
Step one. Base
First of all, the author decided to make a base on which the grill will be located. The author decided to make the foundation from an old steel cabinet. Just cut the cabinet and weld, as you wish. The result is an excellent base, hollow inside. If you try a little, you can make inside the shelves and doors so that you can fold kitchen utensils.
Step Two Stove manufacturing
We make a furnace, here we need a gas cylinder, and it is extremely desirable with the maximum thickness of the wall, so that the furnace lasts a long time. To begin, fill the bottle with water under the neck and turn off the tap. We start cutting with water inside, so the cylinder will never explode, but note that when cutting, the remnants of gas mixed with water may catch fire. We carefully cut it by turning the can so as not to wet the grinder.
The author cuts the door in the tank and also cuts the neck. Since the author had a large cylinder, he cut it into two parts, the lower part is the base, here we set the grate. As for the grate, they can be welded from rebar or other thick steel rods.Under the grates, we weld the stops, they can be steel corners.
We hang the oven doors on strong steel hinges, and so that smoke does not come out of the cracks, the author scalded the doors with plates of sheet steel.
Be sure to do and blew, it is regulated by the author with a bolt.
Step Three Assembly of the main part
To assemble the main part, you will need to cut another large capacity, in our case it is a boiler for heating water. This container will be a grill. We cut a hole for the chimney in the tank, and then above it we weld our stove, made earlier from a gas cylinder. Of course, the welds should be strong and tight, the author works with TIG.
At the end, you can also weld the base, which the author made earlier from a steel cabinet.
Step Four Tool cabinet
As an additional part of the body, the “cab” of the locomotive, the author adapted another steel cabinet. Inside the cabinet you can make shelves and store kitchen tools and more. The author welded the latches to the cabinet doors so that the doors would close well. And so that no one gets inside, you can put a lock.
There is a roof above the cabinet, which is also part of the locomotive. We weld a simple frame from profile pipes under it, and any thin sheet steel that can be easily bent is suitable for overlapping.
Step Five Grill and chimney
We cut the door into the grill and hang it on the door hinges. We weld the door in a circle with sheet steel to seal the cracks. Later, the author will install a thermometer in the door to control the temperature.
At the end, cut a hole in the grill under the chimney and weld it into place. On the top of the chimney, the author installed a damper to adjust the draft.
Step Six Painting, assembly, testing
We paint the entire structure with heat-resistant paint, and also paint the wheels of the locomotive. After painting everything can be assembled, do not forget to install a shelf opposite the grill. It looks gorgeous homemade, you can drown. The temperature inside the grill rises above 200 ° C, which is enough for cooking. The temperature in the furnace and the combustion process are easily controlled. Such a homemade product will definitely not be left without attention of the guests!
The project is completed on this, I hope you liked the homemade work, and you found useful thoughts for yourself. Good luck and creative inspiration, if you decide to repeat this. Do not forget to share your ideas and homemade things with us!
