When you need something to warm up or unsolder any part on the board, you often ring friends and acquaintances in search of a special fixtures. Why strain your friends with your requests, if you can independently make a soldering hair dryer and decide for yourself whether you will give it or not.
We suggest watching our video, which will describe how to do in home conditions soldering dryer.
For work, we need:
- a cooler taken from an old computer;
- a tube;
- heating element;
- Power Supply;
- the wire;
- a piece of wood;
- a spiral.
The design is very simple, there is a spiral in the tube that heats up.
A cooler is needed to supply air to this duct.
The power supply, which is connected to the outlet, has two switches on it, where one is responsible for the maximum temperature, and the second for switching on.
The operation of the heating element can be checked on aluminum wire. If you did everything right, the wire will completely melt in 1 minute.
You can, of course, buy a soldering station, but it will not work in all cases.
Even if you reduce the temperature on the spiral, it will still keep the heat.
To repeat this hairdryer, use only ceramic tubes.
The stand is made from a piece of metal for the legs and from an ordinary piece of wood. You need to bolt the legs to the pieces of wood, which will hold our heating element.
Using your imagination, you can independently repeat such a hairdryer at home.