In general, this is the case, for ten years I did not really deal with knives, although I love this business, in general, I decided to do one. Something encouraged me to do this, I spent a month on it, look in the profile if anyone is interested.
Two good replicas were bought, on the originals of chesn. the word of money is a pity, the knives are certainly good, but I will always find how you can spend the money otherwise.
In general, for a hobby, they turned out to be quite good.
I got some titanium, I wanted to try new directions for myself.
There are some necessary tools, a vise, a needle file, a small emery and all sorts of nonsense at the disposal. There is a dremel by the way, a good thing, but a noisy infection.
The first decision was to make a titanium spacer a mile spider, by the way I note who does not know the property of titanium, to form an oxide film of a certain color on the surface of the material, in short, in an acidic environment at a certain voltage, a certain nice color is obtained, which can be used to help.
The best thing is to have LATR, but this is a separate issue, I used a couple of transformers and a diode bridge, I had enough.
So, the photo of the process will not be much, mainly the intermediate stages, but do not hesitate, everything is done manually, mainly by files.
immediately we make a new clip and send this matter for chemotherapy
In general, titanium is such a material, it is quite interesting, the color changes under the mood, in an instant
I took some photos then for ebay, I wanted to sell and try something else, but I sold it, our mail turned me around, my aunts in America do not send knives, there is a ban on importing into the country, well, okay, it’s not burning for us.
At this time, I was a little comforted, I thirst to play with titanium, Ontario RAT rat fell into the hands of the people.
Here, of course, I wanted to make her a new spacer, but my interest went further, I decided to make a new die, this model as if they stand out, if they are hidden inside the handle of the spider, then here they are immediately visible. With relatives, it’s not particularly interesting, there is titanium. make new ones.
Here again, I’m not particularly a process, there are intermediate steps. Now I’ve looked, but I don’t have any stages.
Here is this rat with extra spare parts.
Here everything is still not neat on the pad, then I redid it, the silicone grease evened the color after the abrasive.
Well, okay, I played enough with knives, there was a lot of work between things, I was not up to the knives, that's for sure.
And now new materials were at the disposal, and an idea appeared.
It was decided to do this, but the inscription also contained the inscription Philpp Plein, just as it could have been by the way.
Skulls need not only to be glued, installation needs to be done, but where, correctly in the recess.
Prepared, if there is a tool, the matter is not complicated.
As a result, I was satisfied, the result is unusual.
Since the golden color of the spacer was very handy, I made this color with rat dies. The color rendition of the camera is very affected, you need to make a couple of photos in the sun.
In general, the color is golden.
So here, like guys. Maybe then I’ll sell these, buy some others, I love of course this is the whole thing, it’s a pity the conditions just do not allow us to do this in a tight one, and the next few years will remain at the hobby level. There were thoughts of taking knives for the author's work, but so far I do not reach the level of those who really like me as an author.
I was with you, Den Sibirskiy.
By the way, oh yes, do not make a new topic for the sake of one knife. Here is the same knife, ten years after which I almost did not deal with knives.
Regards, Den Sibirskiy.