There are so many different crafts. But there are those who cannot but surprise. And such, perhaps, is a barbecue from a barrel, which can also be done with your own hands!
In order to build such homemadesome materials will come in handy:
• tin barrel;
• specialized painting for the barbecue itself;
• several hooks;
• a specialized regulator that is designed to regulate the temperature process directly for barbecue;
• Be sure to buy gloves and glasses in order to protect yourself from possible risks;
• barbecue mesh;
• a lattice from that steel which will not give in to process of corrosion;
• bolt and nuts;
• large pipes that are necessary for chimneys;
• respirator;
• steel and welding;
• polished device;
• a hammer, and sandpaper;
• felt-tip pen;
• drill and drill.
Step 1
Before you start the main work, you need to make sure that your container is empty and most importantly, that there are absolutely no liquids in it, so as not to risk your life later, because such liquids can also be acids that tend to ignite.
Set the barrel so that it is convenient for you to remove old paint from it.
Step 2
Next, take a pre-prepared pipe with a diameter of about 80 millimeters and cut it at a right angle of forty-five degrees.
Then you need to attach two pieces tightly and cook.
Be sure to check how high quality you get the seams. Consider the fact that there should simply be no gaps.
Step 3
To make the cuts on the barrel more accurate and symmetrical, draw small markings on it.
Step 4
Weld a few strips of steel to the edges of the sheet you cut. They will not allow the lid to fall through when you close the barbecue.
Step 5
After these steps, you need to clean the barrel dramatically. For such purposes, specialized oil-based products can be used.
Step 6
The base of the barbecue should be made of rods.
As for the frame, it forms the shape of a kind of rectangle that will fold inward.
Step 7
To make a handle, it is necessary to apply, directly, welding.
Next, attach the handle to the barrel itself. And do not forget to remove metal shavings from the process.
Step 8
Finally, paint the barrel with a specialized paint that can withstand fairly high temperatures.
Gather your barbecue and have a nice weekend.