» Car DIY »LED repeaters in mirrors

LED Repeaters in the Mirrors


All that is needed for this device is an LED module of the desired shape and size. Installing the module is quite simple.
LED Repeaters in the Mirrors


First you need dismantle the mount frame and mirrors. Then we heat directly the plastic frame itself with a hairdryer, so that it becomes softer, and then carefully remove the glass with a mirror from the frame. Then warm the mirror itself and slowly and gently separate the heating film from the mirror. Then put the LED module on the mirror and glue the heating film back. In order for it to stick better, you can also warm it with a hairdryer. Then insert the mirror back into the mount frame.

If there are no wires for the turn signals in the mirror, then it is necessary to lay them. To find and feed on the necessary wires, you need to familiarize yourself with the technical part of your car.




7
10
10

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
2 commentary
Vania
A link would still be to the module, no matter how much I was looking for some defectively cropped ones, there are fewer LEDs and the vidok turns out ....
Wow, all mirror must be taken apart.

We advise you to read:

Hand it for the smartphone ...