After acquiring an apartment, windows usually change and a new door is installed. After that, work begins on the balcony, which should be insulated and make repairs in it.
We bring to your attention one of the options for interior decoration of the balcony, which is usually raw and very cold.
Necessary materials
1. Dupel nails (diameter 6 mm and length 40 mm).
2. Galvanized metal pendants.
3. Punch.
4. Wooden slats (25x40 mm).
5. Polyfoam (30 mm thick).
6. Plastic panels (for ceiling).
7. Construction stapler.
8. Clothes dryer (optional).
9. PVC panels.
10. Plastic corner.
11. Skirting.
12. Glue (for plinth).
Holes are made with a puncher in the ceiling and walls, and galvanized metal pendants are fastened with dowel nails.
It is necessary to fix wooden slats to the pendants. If there is a clothes dryer on the balcony, then additional rails should be provided for it.
It is necessary to measure the distance between the rails and cut the foam.
It is necessary to fill the cavities between the wooden slats.
The same procedure needs to be done with the walls.
Plastic panels should be cut and, using a special construction stapler, attached to wooden battens.
A clothes dryer is mounted on the ceiling.
It is necessary to attach PVC panels on the walls to wooden battens. In order to avoid gaps between them, you can tap each panel with a hammer through a soft substrate.
Insert a plastic corner into all internal corners.
Then, a skirting board is glued around the perimeter of the ceiling.
The window sill is framed by a plastic corner cut along. In this case, only flat bars are used.
The slope should be trimmed with a plastic corner.
It is necessary to mount a clothes dryer.
Awesome repair on the balcony is completed.