Often, predator hunters face a problem when it is impossible to catch spinning due to the large number of snags, algae and other obstacles. But it is precisely in such places that the most fish is often found. To find a way out of this situation, amateur fishermen came up with a new way of loading the vibrotail, in which the tackle ceases to cling to obstacles.
Materials and tools:
- vibration tail itself;
- a set of sinkers (it can be pellets or adhesions);
- Moment glue (it is the best suited when working with silicone);
- blade (for "surgical" work).
The process of manufacturing a vibrotail with internal loading
Step 1. Cut the wobbler
Using a blade in the abdominal cavity of the bait, the author makes an incision. It is important to do everything very carefully so as not to damage the bait, and not to cut yourself. The depth of the cut should be no more than half the thickness of the wobbler. If you make a mistake here, the bait will not play as well.
Step 2. Installation of weights and gluing
The number of pellets for the bait is selected depending on the working depth of the gear. Having set the right number of sinkers, you can proceed to sticking the bait. First you need to put a small layer of glue on the sinkers and wait a while for the first layer to set. Next, you can apply the main layer of glue and completely glue the belly wobbler.
For ease of bonding, tackle can be fixed with a few clothespins. After this, the adhesive must be given at least 5 hours to dry.
Step 3. "Baptism of Fire"
At this stage, the future bait passes through a serious test, it will need to be thrown into boiling water for 45-60 seconds. This is done in order to identify possible defects. Also, due to the effect of high temperature, silicone restores its properties and begins to bend better, as a result, the bait becomes more attractive to the predator. This process when creating such a bait is simply a must.
That's all, in fact, a new bait with which you can feel confident in the grass or other underwater vegetation is ready. It remains only to establish the offset hook and you can begin to search for the insidious predator - pike.
For such a bait, you can use such types of wiring as twitching, jig, or it can be ordinary wobbler wiring.