To make this homemade You will need the following materials:
Materials
• Bamboo stick
• Neodymium magnets 30 * 5 mm in the amount of 2 pcs.
• Holder for smartphone (car)
• epoxy resin
• Bluetooth remote;
• Rope (twine)
• glue
• Hacksaw
• Sandpaper
Step-by-step manufacturing of homemade products
Step 1. Take a bamboo stick and cut the required length. After that, the cut piece must be cut into two parts. In order for the cut edges to be smooth and free of burrs, it is worth sanding them with sandpaper
Step 2 Take neodymium magnets and use epoxy to glue them to the ends of the bamboo stick.
Step 3 Now you need to wrap one end of the stick with twine, pre-lubricating the base with glue. Twine turns should be made very dense.
Step 4 Take the Bluetooth remote control and attach, or rather tie it to the handle
Step 5 After that, it is worth fixing the holder for the smartphone to the second side of the stick. Customize the details to fit. For reliability, all parts of the holder should be planted on epoxy. So you will be sure that the phone at the crucial moment will not fall along with the holder.
That's it, the unique selfie stick is ready. This know-how is very easy to fold and fit in a backpack or purse. Due to the fact that neodymium magnets are mounted on the stick, it is very easy to assemble, for this you just have to wave your hand.
Successful homemade!