"Tunguska-2"
Video about "Tunguska"
Some characteristics of the Tunguska-2 all-terrain vehicle.
The length of the boat is 2500 mm.
The width of the boat is 820 mm.
The height of the boat is 560 mm.
The volume of the boat is 1060 liters.
The bottom and part of the sides of iron are 2 mm, and the rest of 1 mm of iron is riveted with sealant.
The brakes will be disc. "Tunguska" left the garage and back.
Tracks and fangs limiters. There were 37 pcs of tracks per track, in increments of 125 mm. The tracks are made of a profile of a U-shaped section 20x40x3 mm from a conveyor from agricultural machines, fangs from chain links cut in half. Bar diameter 14 mm, height 90 mm. The fangs were welded with a jig to get the same angle on all tracks.
Departure to the swamp with a drag from an airplane ski. On a drag of skradok for geese. Running rigid on three wheels. One wheel drive, track tension occurs due to inflation of the wheels.
Instead of a check point (gear change box) from a Dnepr motorcycle, which fell apart, a check point from a GAZ-69 was installed on a car make-up. Management has improved a lot. Installed disc brakes from the VAZ-2101 on the front axle. There are no brakes on the rear axle, these are enough to control, since the weight car making it turned out very small - 450 kg.
The hooks on the tracks are made of a 5x5 mm strip 60-70 mm long to reduce track slippage.
The engine is "Lifan" -15 hp
The drive to the driveshaft goes through a chain drive with a decrease of 14:39.
The creator of Tunguska-2, Sergei Nikolaevich, welcomes us! 1 min 23 sec.
.
Successes to Sergey Nikolaevich.