On the forum of the site "Technoforum.com" it is registered under the nickname "RUS 31".
The all-terrain vehicle passed the tests and you see how this happened. video.
The performance characteristics car making.
Engine from the VAZ-2103 after overhaul.
Gearbox (gearbox) -basic from the VAZ-classic.
Instead of a reduction gearbox, a gearbox from GAZ-51 was used.
Drive axle from VAZ-2103.
Independent suspension on all road wheels.
The frame design, the all-terrain vehicle is not intended for swimming.
The differential rotation.
Disc brakes.
Independent suspension on springs and shock absorbers from the URAL and Dnipro motorcycle. The engine from the VAZ-2103 together with the clutch and gearbox.
Suspension arm with axle.
Suspension axis on caprolon bushings, the lever is made of a profile of 60x440 mm.
Dimensions of the sleeve: length - 120 mm,
outer diameter - 60 mm,
inner diameter - 40 mm,
the length of the lever is 350 mm along the axes.
The axis of the support roller along with the roller. Roller made of aluminum sheathed with conveyor belt.
The gearbox from the GAZ-51 sits on the frame rigidly, transmits rotation to the bridge through the driveshaft.
The connection of the two KPP-GAZ-51 and VAZ. During trips use only 2-3 gears on both boxes.
The connection of the GAZ-51 gearbox and the bridge leading from the VAZ.
Caliper mounting on the bridge.
Marking and drilling holes on the conveyor belt for the manufacture of tracks. The tape is 7.5 meters long, 120 mm wide and 12 mm thick.
Fastening tracks to a tape using M8 bolts.
The caterpillar is ready for use. The caterpillar overlaps under two tracks. The length of the track is 400 mm, the distance between the centers of the tracks is 1040 mm, between the tracks is 64 mm.
The throttle drive is through the cables.
The cable sheath can be made of any length from motorcycle cables or from the parking brake cable of a passenger car.
The ends they have are about the same.
The all-terrain vehicle is assembled and ready for painting.
All-terrain vehicle is painted with a primer "Rust-stop" 3 in 1.
The sides are attached to the frame with rivets.
The silencer is installed next to the engine.
The shape of a homemade silencer.
The driver's seat in the cab and control devices.
Instruments and all-terrain vehicle control.
Hood space.
Seats for passengers.
Further tests of auto-make. video
.
Alexander Zakurdaev turned out to be a wonderful all-terrain vehicle. We are waiting for more auto-make from him.