Here's how this unit works. video
In winter there is always a lot of snow and you can clean it not only with a shovel. So Lukman Garayev adapted to this work.
your chainsaw. Let's see what a snow blower consists of. video.
In order to build such an aggregate yourself it is necessary to have a chainsaw, some technical knowledge in mechanics and, of course, a great desire.
Let's look at what a snow blower consists of.
The Friendship power unit is attached to the frame with two bolts. One attachment point is located here.
The second point of attachment of the chainsaw.
The length of the supporting part or ski is 480 mm long. A wooden block was taken and sheathed with a sheet of galvanized iron, fixed to corner 45.
The side part of the snow blower is made of a sheet of metal 6 mm thick. Sheet height 300 mm.
Sheet width 250 mm.
The snow blower is driven through a chain drive. The chain and sprockets are taken from the IZH motorcycle. Leading asterisk.
Led asterisk.
The screw is made of rubber. The rubber strips are fixed at the ends with four bolts.
The shaft is taken from an agricultural machine found in scrap metal.
The sprocket from the shaft is attached to the sprocket from the motorcycle with three bolts.
The shaft sits on two bearings with an inner diameter of 25 mm.
The blade width is 120 mm from metal 4 mm thick.
The width of the snow blower is 600 mm.
A home-made galvanized iron pipe is fixed with three bolts.
The handle is made of a half inch pipe and bolted.
The throttle control is carried out by a cable.
The casing of the snowblower is made of galvanized iron, which is fixed at the bottom to a metal plate 40 mm wide and 4 mm thick.
It turned out a very interesting unit for cleaning snow. Watch the video how the snow blower works. Break-in moment of the unit.
Good luck to Lukman Garayev, our master. He already knows us in his own way all-terrain vehicle "Rider".