Repair in the house took place and there was parquet or laminate. No need to throw it away, it will still be useful to us. Columns can be constructed from these materials. do it yourselfthat cannot be distinguished from industrial manufacturing. Such equipment will decorate the room and will not be superfluous in everyday life.
Used materials:
1. Pieces of parquet or laminate.
2. Screws.
3. Foam.
4. Glue "liquid nails."
5. Drill.
6. Tools.
7. Mount for speakers.
8. The dynamics of the required volume and strength.
Step 1. Cut the parquet board into two parts, guided by the scale that you need for the upcoming product.
Stage 2. Blind the parts of the board, lay them on a smooth plane to dry.
Step 3. Already after drying, remove the screws or nails that were used to fasten the laminate.
Step 4. Adjust the scale of the column.
Stage 5. We undertake to unite parts of a column.
Step 6. According to the layout of the location of the speakers, attach them to the plank.
Step 7. With the support of the mount (router), attach the speakers.
Step 8. At the rear, cut out the speaker opening.
Step 9. Fold all the components together to make sure the location of the holes is accurate.
Step 10. Create Grooves for Postings.
Step 11. The housing is ready. You can proceed to filling. Paint the column.
Step 12. Fill the void with foam.
Done!
It remains to attach the legs and put on the net.
