» Topics » DIY ideas »Homemade collapsible extended scooter from a serial bike

Homemade collapsible extended scooter from a serial bike

During the operation of the invented scooter UNIVERSAL 2015, there was a need to transport bulk cargo (hay) and electric trips, so I came up with a new scooter design with an elongated central part of the platform and a collapsible unit (for now, I’ll take a picture and tests when I fully check the operation and take pictures.

In the process of transporting hay to the rear trunk, I fasten two more interconnected bags for 1/3 length and it turns out as a serial bicycle trunk (trousers), only much more capacious, and on top still along, between those bags one more is convenient to fasten

Question \ topic is automatically published in the social. site network - stay tuned for answers there:

Suitable for topic

Related topics

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
4 commentary
I come from a village ... so there the bike was used more as a car than for its intended purpose ... Firewood was transported from them in the forest (by tying several logs along the frame on both sides), the bags are my thing! One pushed through the triangle of the frame, the other on the trunk! Sometimes another third - on the steering wheel, with emphasis on the frame! If the hay is in bags, then a few are stuck in the frame, on the trunk, too, then they are still superimposed between those and those and linked. If only the length of the arms was enough to go near ... Three-meter boards? They were stacked on the steering wheel, and behind they were tied to the frame near the axis of the wheel. A meter behind, a meter to the helm and a meter up .... And no one thought that it was necessary to go at the same time - just to bring the load. So, something like that would have found its consumer)))).After all, a car is not convenient in that it needs a certain width for driving with both wheels, and a bicycle can be carried out where there is no this width in one level.
And still all the old people went with bicycles - they could not ride already, but walking, leaning on a bicycle, was much easier
if you stand on it in the center, it will immediately have an amba, no matter how much the frame is strengthened. The lever is very big. This is pure for transporting hay) Although it is more interesting to lay bags across. Pieces 6 will fit
Just one thing is not clear: how to get around on this transport? where to land your fifth point? Or should this design be dragged along? In this embodiment, it is very inconvenient - loaded it must be leaned against the wall or not let go of the hands all the time. I would only make such a 3-wheel version - it will be stable and you can slide down the hill while sitting on bags X), without fear of tipping over.
bicycle limo))

We advise you to read:

Hand it for the smartphone ...