Each summer resident and an amateur gardener every autumn faces a problem like pruning trees. Someone performs this action while standing on a ladder or stepladder, some use a knot-cut, which by the way is much more convenient, practical and safer. But at the same time, a problem arises when the cut branch remains on the crown of the tree and does not want to go down clinging to the tree branches. What to do in this situation is not flattery on the tree and pulling off the cut branch.
The author offers a simple solution to overcome this situation. Simple but very useful and practical. device, tested in practice and serving on his farm for more than one year. So what is this mechanism? Everything is very simple - a long pole 2 or 4 meters, at the end of which a loop is inserted into the holes. Raise the pole up, insert the loop on the stalk of the branch that was cut and did not want to fall and tighten the loop and pull the branch to the ground.
Cunningly invented. And so now we will consider in detail how and from what the author made such a lifesaver.
Materials: 2 by 2 cm block and meta four rope.
Instruments: hacksaw, drill, knife, sandpaper, planer.
And so the first thing the author worked on the surface of the bar with a planer
Then with a sharp knife he made such a bevel.
In place of the bevel made two holes.
Then these holes countersink.
Next takes the rope threaded into one hole.
Then to another.
And you definitely need to make a knot at the end of the rope.
Well, in fact, the whole device for removing cut branches is ready.
Further, the author shows an example of his invention in action, the test site was chosen personal plot of our inventor. And so the author cut the branch.
As you can see in the photo, the branch hung on the crown, as usual, but it doesn’t matter, the author has a miracle stick.
Then he drew a pole and a loop on a branch.
Tightens the loop.
And removes a branch from a tree.
A very good fixture for gardeners lovers.