You can apply it anywhere, because of its small size.
I assembled the hanger by combining two colors, the main one is darker, and the light shelf seems to me more attractive.
But you can make one color, taste and color ...
And so, we need details of the following sizes:
1) 1000 * 135 mm. 4 pcs. Main planks, vertical.
2) 695 * 50 mm. 2 pcs. Fixing strips.
3) 700 * 200 mm. 1 pc shelf.
From the tool we need:
Iron (for gluing edges).
Stationery knife (for trimming the edge).
Electric drill.
Drill with a diameter of 4.5 mm.
Screwdriver.
The rest are small things:
The edge is narrow 11 meters.
Furniture screed 4 pcs.
Furniture screws 30 mm. - 20 pcs.
2 hinges for hanging on the wall
And so we glue the edge. All parts are glued on all four sides, in a circle.
This is what we should get.
We put the details in a row, face down.
Step away from the edge 110 mm. we establish on top the fixing bar 695 * 50 mm.
We drill two holes (only not to the end, about a depth of about 12-15 mm).
It is unforgettable to leave a small patik with an edge, about 2-3 mm.
And screw two screws.
Skipping 54 mm. set the next bar, (I had a strip of laminate with a width of 50 mm, I just added another strip of fiberboard, it just turned out 54 mm.
Also from the bottom we measure 110 mm, drill and twist the screws.
We also do the same on the other hand.
Now on one side we mark 200 mm. Draw a line with a square.
Having departed from the 10 mm line approximately in the middle of the bar, we drill through holes.
Turn our grill face up.
We also mark 200 mm and draw lines.
We fasten the eyelets for hanging.
We expose the shelf in a line from the front side, and drill holes through both slats.
We pull together a furniture coupler.
The hooks you choose and the location of the hooks to your taste.