» Furniture »Rocking chair for two people

Rocking chair for two people

Furniture
Added 5 comments
Rocking chair for two people

This article will discuss how to make a rocking chair for two people.

Tools and materials:
-Plywood;
-CNC machine;
-Sander;
-Glue;
-Fasteners;

Step One: Design
First, the author created a rocking chair project. It consists of two oval frames and lamellas installed between them.


Step Two: Making a Layout
The author makes a model of a rocking chair out of cardboard.




Step Three: CNC Operation
On a CNC machine, she cuts out parts of the future chair from plywood.



Step Four: Build
Cleans cut parts. Glues two reinforcing elements to the oval parts.




Having glued the side surfaces, it paints over the end parts of the rocking chair.




Step Five: Pillow
Sews pillows for the chair.


Step Six: Installation
It remains to assemble and install a rocking chair in its intended place.





Let's watch a video about how a rocking chair works.
0
0
0
10
Added 5 comments

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
5 comments
Author 0
Reply To quote A complaint
I personally did not do it at the enterprise, there was no need, but we still have a private company, the advertisement is pasted + d. Vasya will cut what you want for denyuzhka. In short, who needs to find how to do it. Yes, and as Pronin wrote in an emergency, and you can cut it with a jigsaw.
+1
Reply To quote A complaint
In our city, which is 15 km away, there are a lot of enterprises, and many of them have CNC as usual as sharpened in your garage.


..... There is one thing ... Yes, just to cut it, you need to conclude an agreement with the plant, pay, and tinker with the "freight documents" ...

Or, you there, how in the USSR, you can bring your knives to the factory, sharpen them and take them home? )))))
Author 0
Reply To quote A complaint
Do you have a CNC machine?
In our city, which is 15 km away, there are a lot of enterprises, and many of them have CNC as usual as sharpened in your garage. I’ll say more, in our village, a former ship’s engineer D. Vasya, and now a specialist in auto repair, has two such machines. Moreover, if one classic laser cutter, the second cuts metal with water and sand. There is no such machine even in the regional center, which is located 80 km from the village.
0
Reply To quote A complaint
<А Станок с ЧПУ...?>
Yes, do a jigsaw on the pattern ...
This is done as if for any people ... And if aunt 120kg and uncle 100kg sit down?
It looks flimsy. It is necessary to calculate the strength and ...
+1
Reply To quote A complaint
blush
Chic thing. I wanted to start doing it myself. Found everything like;
-Plywood;
-Sander;
-Glue;
-Fasteners;
Do you have a CNC machine?
I recently read that they publish simple crafts "Do it yourself"Yes, the bummer has turned out.

DIY categories

We advise you to read:

Hand it for the smartphone ...