» Furniture » Tables and chairs »Simple DIY stool

Do-it-yourself simple stool

Do-it-yourself simple stool

Hello to all lovers homemade, surely every motorist has garage in order to preserve the integrity of your car, as well as to repair it if necessary. But it often happens that there are no seats in the garage or you have to use cans, hemp for other purposes as a chair. It was this small problem that led the author to create a homemade stool, which I will discuss in this article.

In order to determine the type of stool, it is necessary to find out what height will be the same optimal so that the knees do not numb or, on the contrary, the chair is not high. Therefore, when choosing a chair height, first of all pay attention to the individual height of the person who will sit on it.

We figured out the nuances, now you can start making a chair, but before that we find out what materials are needed.

In order to make a homemade stool, we need:
* Plywood sheet 18mm thick.
* Electric fretsaw.
* Seat cover material, leather, etc.
* Furniture stapler with brackets no more than 18mm in length.
* Corners.
* Screws.
* Filling foam rubber and spanbond.

That's all the materials needed for assembly, so let's get started.

Step one.
The first thing to do when creating a stool is a drawing. Having a drawing, you can easily transfer it to the material from which the stool will be made, which just needs to be done.


Step Two
After the drawing is ready and transferred to the material, you can begin to manufacture the basics from which the stool will be assembled. Saw according to the drawing of the part using an electric jigsaw. When working with a jigsaw, be careful and use safety glasses.

Step Three
Since the drawing is designed for three stools at once, you will need three seats, they must be covered with material, in this case, leather imitating snakeskin. Foam and spunbond are used as filler; after placing the filler, everything is fixed on the reverse side with brackets using a furniture stapler.



Step Four
At the end, we connect the seat with the resulting legs, we do this with the help of corners and screws.


On this homemade stool is ready and in the garage there will always now be a place to sit down.


Thank you all for your attention.
0
0
0

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose

We advise you to read:

Hand it for the smartphone ...