Greetings to all the masters!
The author devotes this article to a very interesting, and familiar to all, craft like fishing. Indeed, for many of us this kind of hobby brings a lot of positive emotions. Moreover, fishing is a powerful antidepressant. When you come to nature, to your beloved reservoir, then all everyday problems disappear like unnecessary garbage. We are already immersed in a very different world, where we feel good.
I will not continue to philosophize. You yourself understand what I mean!
Seamlessly move on to homemade.
Many of us use different types of lures. These are rotating and oscillating spinners, and mormyshki, and turntables, and poppers, and balancers, and many others, but we will talk about this type of bait as Wobbler.
All of the above lures can easily be bought at a fishing store. But it would be very easy and costly, because we can make our own home-made fishing lure without much effort with minimum costs.
Today, the author will tell us how to make a wobbler. do it yourself from an ordinary beer cork, with which we will catch perch.
To create a wobbler we need.
Material:
- beer cork;
- paper clips;
- Styrofoam;
- two small screws;
- swivel with a fastener;
- double or triple hook with a crown.
Tool:
- nippers;
- stationery knife.
Well, let's begin!
We pick up a standard beer lid or any other drink. Then with the help of nippers we bite off three recesses on both sides. Example in the photo. This will be the so-called front and tail lobe.
Then, using your hands, squeeze both halves of the cork. We get such an unusual blank for the future wobbler.
Next, we take polystyrene and with the help of a clerical knife we cut a piece from it. We put it inside the cork, so we will increase the buoyancy of the gear.
Now in the tail section you need to make a small hole and use a small self-tapping screw to fasten the swivel with a clasp and hooks.
Next, you need to make the core of a regular paper clip. It will connect the tail with the front, and will also be fixed to the fishing line.
More details are shown in the photo.
That's actually all ready! We got a simple and unpretentious wobbler for catching perches and other predatory fish. The only thing left is to go to your favorite pond and adjust the gear a little. This can be done due to the front and rear blades, that is, they will need to be bent or straightened, thus, the movement in the water will change.
If desired, you can change double hooks to triple and so on. In general, you need to experiment.
Do not be afraid and do not be lazy to invent and make fishing equipment yourself.
Good catch to everyone!