Each motorist wants to make the interior of his car beautiful and unique, as an option, you can add additional lighting. You can place it almost anywhere, in this case, the backlight will be mounted on the seat belt locks. This will greatly simplify the process of fastening in the dark, and auto will make it a little more unique.
Materials and tools for homemade:
• LEDs;
• resistors;
• thermal gun;
• the wire;
You will also need a key for 17, a screwdriver and more.
The process of manufacturing additional lighting
Step 1. Removing the seat belt
The locks are dismantled with the usual key 17. You need to unscrew only one bolt, remove the car seat - no need. To disassemble the lock itself, you need to use a flat screwdriver.
Step 2. Installing the LEDs
First you need to carefully disassemble the lock, this can be done with a flat blade knife or other passing tool.
All LEDs and necessary wires are fixed on the lock case. The author fastens them with hot melt adhesive. Before assembly, it is necessary to check whether everything is well placed, and then fold the lock in the reverse order. It is recommended to use resistors in the circuit, they will significantly extend the life of the LEDs.
Step 3. Connection
To connect the backlight, all wires are pulled under the seats and connected. You can connect the wires to the button dimensions, through the cigarette lighter or directly to the ignition of the car.
Conclusion
If the car owner wishes, you can additionally install a lamp that signals that the belt is not fastened.