The platform is a bit like goats for sawing firewood, it is easy to disassemble and carry. Its base is two crosses fastened with a trihedral pole with a side of 60–70 mm. A collapsible ladder rests on the side of the slot on the protruding end of the pole. Its steps are connected with the crossbar of the cross in the grooves. For rigidity, a horizontal horizontal crosspiece is mounted on the grooves to the lower crossbars of the vertical crosses. The flooring is placed on the reinforced upper rails. You can set the height of the platform yourself by varying the number of crossbars. Its width and length are arbitrary, but a platform too large will be heavy.