» Fixtures »Conductor for drilling at an angle to the plane

Conductor for drilling at an angle to the plane

Conductor for drilling at an angle to the plane

This article will discuss how to do device for drilling holes at an angle to the plane. Such a device (conductor) can be used in carpentry.

Tools and materials:
-3D printer;
-Aluminum tube;
-Drill;
-Drill;
-Vise;
-File;
-Hacksaw;
- mallet;
-Grinder;

Step One: Design
First, the author, in a special SolidWorks program, develops a conductor project.






Step Two: Print
Then exported the file to STL format, and sent it for printing.




Step Three: Guide
After the base is printed it processes the hole. First uses an 8 mm drill, and then 10 mm. Cuts 3 centimeters of aluminum tube and inserts into the hole.








Step Four: Drill
It remains to grind, in a certain way, the drill and everything is ready.






Now you need to check the conductor in operation.









All steps for making a conductor can be seen in the video.

STL file can be downloaded. In the absence of a 3D printer, the conductor can be made from a wooden block.
9
9
10

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
2 commentary
Well, very simple! Special program, 3D printer, etc. Not easier: a wooden block and a protractor?
What is the point of fooling around with aluminum, which the drill itself exudes at the fifth hole?

We advise you to read:

Hand it for the smartphone ...