Hello everybody. I want to share with my friends a good device that not only comes in handy at home, but you can also make some money doing it by removing tattoos in the safest way — a red laser.
So there you will need for this device three red lasers of 5 mw invisible.
Lasers need to be selected according to current so that the ignition voltage of them is as equal as possible.
And the current is like in this photo.
For the head, I took a piece of Plexiglas 3 by 3 cm and a thickness of 1 cm and drilled holes in the end 3 of a diameter of 6 mm and a depth of 9 mm. I sharpened the other end at an angle of 45 degrees.
I inserted lasers into the holes and secured them with silicone. I connected all the lasers in parallel.
I made a pen out of plastic.
The device does not make sense to power from the batteries - they sit down, the laser needs a stable voltage from the power supply. Be sure to work with red glasses.
Now about the removal - apply the device to the tattoo close. A slight burning sensation and tingling should appear. Enough for 5 minutes three times a day. Wash skin first with soap and lubricate with hydrogen peroxide.
Reducing a tattoo of 3 by 3 cm in size will take from about a month to three, depending on the mascara it is made on.