This fishing technique can be used both for ice fishing, and when fishing from the shore, if you slightly modify the design. All details can be found in your home. the garage and homemade does not take much time to build. When a fish is bite, a self-detector fires, so it remains only to fish out the fish.
Materials and tools for homemade:
- fishing rod with reel;
- a piece of wooden board;
- bolts with nuts of various sizes;
- pliers;
- drill;
- wire hanger;
- a piece of metal tube and more ...
Homemade manufacturing process:
Step one. Fishing rod holder
First of all, the author took up the manufacture of a bracket for a fishing rod. Of course, it should be strong so that the fish does not tear out the fishing rod when biting. For such purposes, a piece of metal pipe was used. Here we also needed a metal bracket, which is used to mount satellite dishes.
Step Two Design basis
The author used a piece of the board as a basis, and a bracket for fishing rod was bolted to it. In addition to this, two holes need to be drilled in the board and with the help of bolts with nuts, a long steel bracket is screwed. It is needed so that fishing rods of various lengths can be installed on the device by moving the trigger loop to the desired distance.
Step Three Trigger bolt
It is not difficult to wait, this bolt is designed to fix the tip of the fishing rod, that is, it is part of the trigger device. The bolt can be used with a long thread to adjust it in height.
Step Four Trigger mechanism
The author makes the trigger mechanism out of a wire hanger. How to bend it, you can see in the photo.
In conclusion, the author adds another transverse plate to form a cross. This cross will not allow the device to tip over when biting fish.