» Knives and swords »DIY leather sheath

DIY leather sheath


From this short article, you will learn how to make a sheath for a knife and what tools will be required for this.
Tools and materials:
- A piece of skin;
-Paper;
-Pencil;
-Scissors;
-Cutter;
-Hole punch on the fabric;
- Pliers for setting buttons;
-Buttons;
-Capron thread;
-Needle;
-Office clips;



Step One: Template
First, the master draws a sketch of the cover. Putting a knife on the paper marks the dimensions. Draws cover elements. The edges of the template draw with an allowance. Cuts out the elements of a template.



Step Two: Pattern
Applying patterns to the skin makes patterns.
DIY leather sheath

Step Three: Stitching
Along the edge of the leather elements, the master punching holes. Staples case elements. For convenience, fixes the elements, when stitching, clamps. When the cover is stitched, cuts the edges with a knife.


It remains to install the button and the knife cover is ready.


10
10
10

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
2 commentary
Author
Figs know what he wrote))) fool
Can you at least not skip the header?

We advise you to read:

Hand it for the smartphone ...